AMSTECH LINEAR DRIVE EDM DRILLING MACHINES

AMSTECH IS YOUR BEST CHOICE
FOR EDM DRILLING
- Single platform design for small footprint.
- Linear Motor Drive with Glass Scales to increase positioning speeds and hold better accuracy.
- Inverter Controlled Spindle for reduced electrode wear and improve accuracy of small holes.
- Inverter Controlled High Pressure Pump to increase flush pressure as the hole goes deeper. Ensures constant flush pressure and improve chip removed.
- Built in measuring cycles to precisely EDM Blind holes without “backstrikes”.
- Large capacity submerged work tank to allow for addition of submersible AB table.
- Various canned cycles can be used such as edge find. Correction of program during the cut for workpiece variations, etc. Software for offline programmings also available.
Download The AMS Tech Brochure
View Demo Video
Call To Discuss Your Application
Request A Quote
Register For Updates
Get the latest from Innovate Technologies
AMSTECH LINEAR DRIVE EDM DRILLING MACHINES – AD SERIES
AMSTECH AD3L
XYZ TRAVELS: 11.8 x 7.9 x 9.8″

Compact Design
Single platform design for small footprint – 75″x83″.
lnverter High Pressure Water
lnverter controlled high pressure pump to increase flush pressure as the hole goes deeper. Ensures constant flush pressure and improve chip removed.
Linear Motor Drive
Linear motor drives X and Y with Precision Glass Scales, provide closed loop feedback for precision location and rapid electrode changing.
Submerged Machining
Submerged cutting allows for better electrode entry and breakthrough and improves total cutting time. Submergible AB indexers are available from many suppliers. All 6 axes are controlled by the AMS Tech Cnc controller and program can be input by MDl, USB, RS232 and Ethernet.
lnverter Spindle Speed Control
Inverter controlled spindle improves the accuracy, reduces electrode wear, and helps to prevent back strikes after breakthrough. o Canned Cycles & Programming Various measuring cycles are available as well as canned cycles for various shapes.
Standard Accessories
- Ceramic Guide
0.5mm x1 pcs ; 1.0 mm x1 pcs - Paper Filter
5µm Fx1 pcs / Sx2 pcs - Electrode Tube
0.5mm x 10pcs ; 1.0 mm x10pcs - Work Lamp
LED: 1 set - Rubber Seal
ER/20 pcs - ER Chuck
1pcs - X,Y Axis Linear Motor Drive
- X,Y Linear Scale
- Inverter Spindle
Optional Accessories
- ATC/AGC
- 3.0~6.0mm Electrode
- Water Cooler
- AB Axis Indexer
NO. | ITEM | AD3L |
---|---|---|
1 | Work table spec. (mm/inch) | 19.7×11.8(inch) |
2 | X,Y axis travel (mm inch) | 11.8×7.9(inch) |
3 | Max. job load size (WxDxH mm) | 27.6×17.7×11 |
4 | Max. job load weight (kgw/lb) | 1764(lb) |
5 | Z axis ram travel (mm/inch) | 9.8(inch) |
6 | W axis travel (mm/inch) | 19.7(inch) |
7 | Automatic Tool Change | 10 or 20 |
8 | Automatic Guide Changer | 5~20 |
9 | Max. electrode (mm/inch) | Ø0.008 ~ Ø0.12 |
10 | Max. electrode length (mm/inch) | 15.7(inch) |
11 | Distance from guide to table (can be increase for AB table) |
1.2 ~ 11 |
12 | Dieletric capacity (L/Gallon) | 119(Gallon) |
13 | Dieletric type | Pure Water |
14 | Floor layout (WxDxH mm) | 68.9×68.9×82.7 |
15 | Machine body net (kgw) | 4409(lb) |
16 | No. of Axis Control |
AMSTECH AD4L
XYZ TRAVELS: 11.8 x 7.9 x 11.8″

Compact Design
Single platform design for small footprint enclosed in 1900 x 2100mm space (75″x83″).
lnverter High Pressure Water
lnverter controlled high pressure pump to increase flush pressure as the hole goes deeper. Ensures constant flush pressure and improve chip removed.
Linear Motor Drive
Linear motor drives X and Y with Precision Glass Scales, provide closed loop feedback for precision location and rapid electrode changing.
Submerged Machining
Submerged cutting allows for better electrode entry and breakthrough and improves total cutting time. Submergible AB indexers are available from many suppliers. All 6 axes are controlled by the AMS Tech Cnc controller and program can be input by MDl, USB, RS232 and Ethernet.
lnverter Spindle Speed Control
Inverter controlled spindle improves the accuracy, reduces electrode wear, and helps to prevent back strikes after breakthrough. o Canned Cycles & Programming Various measuring cycles are available as well as canned cycles for various shapes.
Standard Accessories
- Ceramic Guide
0.5mm x1 pcs ; 1.0 mm x1 pcs - Paper Filter
5µm Fx1 pcs / Sx2 pcs - Electrode Tube
0.5mm x 10pcs ; 1.0 mm x10pcs - Work Lamp
LED: 1 set - Rubber Seal
ER/20 pcs - ER Chuck
1pcs - X,Y Axis Linear Motor Drive
- X,Y Linear Scale
- Inverter Spindle
Optional Accessories
- ATC/AGC
- 3.0~6.0mm Electrode
- Water Cooler
- AB Axis Indexer
NO. | ITEM | AD4L |
---|---|---|
1 | Work table spec. (mm/inch) | 21.6×16.9(inch) |
2 | X,Y axis travel (mm inch) | 15.8×11.8(inch) |
3 | Max. job load size (WxDxH mm) | 31.5×21.6×13 |
4 | Max. job load weight (kgw/lb) | 1980(lb) |
5 | Z axis ram travel (mm/inch) | 11.8(inch) |
6 | W axis travel (mm/inch) | 19.7(inch) |
7 | Automatic Tool Change | 10 or 20 |
8 | Automatic Guide Changer | 5~20 |
9 | Max. electrode (mm/inch) | Ø0.008 ~ Ø0.12 |
10 | Max. electrode length (mm/inch) | 15.7(inch) |
11 | Distance from guide to table (can be increase for AB table) |
1.2 ~ 13 |
12 | Dieletric capacity (L/Gallon) | 119(Gallon) |
13 | Dieletric type | Pure Water |
14 | Floor layout (WxDxH mm) | 68.9×72.0x82.7 |
15 | Machine body net (kgw) | 5071(lb) |
16 | No. of Axis Control |
AMSTECH AD5L
XYZ TRAVELS: 19.7 x 11.8 x 9.8″

Compact Design
Single platform design for small footprint enclosed in 1900x2100mm space (75″x83″).
Invert High Pressure Water
Inverter controlled high pressure pump to increase flush pressure as the hole goes deeper. Ensures constant flush pressure and improve chip removed.
Linear Motor Drive
Linear Motor Drive with Glass Scales, on X Axis (opt. on Y Axis) to increase positioning speeds and hold better accuracies.
Submerged Machining
Large capacity submerged work tank to allow for addition of submergible AB tables from various manufactures. All 6 axes are controlled by The Industry PC utilizing AMStech software. Ethernet, USB, Rs232, and MDI input.
Invert Spindle Speed Control
Invert Spindle for reduced electrode wear and improve accuracy of the small holes. Built in measuring cycles to precisely EDM Blind holes without “backstrikes”.
Canned Cycles & Programming
Various canned cycles can be used such as CHMER and edge find, correction of program during the cut for casting variations, etc. Software for offline programming is also available.
Standard Accessories
- Ceramic Guide
0.5mmx1pcs; 1.0mm x 1pcs - Paper Filter
5um x 2pcs - Electrode Tube
0.5mm x 10pcs; 1.0mm x 10pcs - Work Lamp
LED: 1 set - Rubber Seal
ER/20 pcs - ER Chuck
10pcs
Optional Accessories
- ATC/AGC
- 3.0~6.0mm Electrode
- Linear Motor Drive Y Axis
- Linear Scale
- Invert Spindle
- Water Cooler
- Indexer
NO. | ITEM | AD5L |
---|---|---|
1 | Work table spec. (mm/inch) | 28.3×16.9(inch) |
2 | X,Y axis travel (mm inch) | 19.7×11.8(inch) |
3 | Max. job load size (WxDxH mm) | 35×26.3×9.8 |
4 | Max. job load weight (kgw/lb) | 2205(lb) |
5 | Z axis ram travel (mm/inch) | 9.8(inch) |
6 | W axis travel (mm/inch) | 15.8(inch) |
7 | Automatic Tool and Guide Change | 10 |
8 | Max. electrode (mm/inch) | Ø0.008 ~ Ø0.12 |
9 | Max. electrode length (mm/inch) | 15.7(inch) |
10 | Distance from guide to table (can be increase for AB table) |
1.9 ~ 11 |
11 | Dieletric capacity (L/Gallon) | 119(Gallon) |
12 | Dieletric type | Pure Water |
13 | Floor layout (WxDxH) | 85.8×87.8×90.6 (inches) |
14 | Machine body net (kgw) | 6614(lb) |
15 | No. of Axis Control |
AMSTECH AD6L
XYZ TRAVELS: 23.6 x 15.7 X 13.8″

Compact Design
Single platform design for small footprint enclosed in 1900 x 2100mm space (75″x83″).
lnverter High Pressure Water
lnverter controlled high pressure pump to increase flush pressure as the hole goes deeper. Ensures constant flush pressure and improve chip removed.
Linear Motor Drive
Linear motor drives X and Y with Precision Glass Scales, provide closed loop feedback for precision location and rapid electrode changing.
Submerged Machining
Submerged cutting allows for better electrode entry and breakthrough and improves total cutting time. Submergible AB indexers are available from many suppliers. All 6 axes are controlled by the AMS Tech Cnc controller and program can be input by MDl, USB, RS232 and Ethernet.
lnverter Spindle Speed Control
Inverter controlled spindle improves the accuracy, reduces electrode wear, and helps to prevent back strikes after breakthrough. o Canned Cycles & Programming Various measuring cycles are available as well as canned cycles for various shapes.
Standard Accessories
- Ceramic Guide
0.5mm x1 pcs ; 1.0 mm x1 pcs - Paper Filter
5µm Fx1 pcs / Sx2 pcs - Electrode Tube
0.5mm x 10pcs ; 1.0 mm x10pcs - Work Lamp
LED: 1 set - Rubber Seal
ER/20 pcs - ER Chuck
1pcs - X,Y Axis Linear Motor Drive
- X,Y Linear Scale
- Inverter Spindle
Optional Accessories
- ATC/AGC
- 3.0~6.0mm Electrode
- Water Cooler
- AB Axis Indexer
NO. | ITEM | AD6L |
---|---|---|
1 | Work table spec. (mm/inch) | 28.3×19.7(inch) |
2 | X,Y axis travel (mm inch) | 23.6×15.7(inch) |
3 | Max. job load size (WxDxH mm) | 37.4×30.7×14.5 |
4 | Max. job load weight (kgw/lb) | 2646(lb) |
5 | Z axis ram travel (mm/inch) | 13.8(inch) |
6 | W axis travel (mm/inch) | 19.7(inch) |
7 | Automatic Tool Change | 10 or 20 |
8 | Automatic Guide Changer | 5~20 |
9 | Max. electrode (mm/inch) | Ø0.008 ~ Ø0.12 |
10 | Max. electrode length (mm/inch) | 15.7(inch) |
11 | Distance from guide to table (can be increase for AB table) |
1.2 ~ 15 |
12 | Dieletric capacity (L/Gallon) | 159(Gallon) |
13 | Dieletric type | Pure Water |
14 | Floor layout (WxDxH inch) | 68.9×72.0x82.7 |
15 | Machine body net (lb) | 7055(lb) |
16 | No. of Axis Control |