Designed for manufacturers in need of a versatile, easy-to-use cutting system it offers OMAX’s intuitive software for optimised cutting capability and power, along with improved automation to maximise uptime.
Combined with an optional Tilt-A-JET taper compensation head, the new OptiMAX is the most accurate system on the market. In addition, it provides advanced optional usability features such as water level control, under bridge lighting, and a machine status indicator, along with fast, accurate, and efficient cutting.
Standard features
- ±0.001″ (±0.0025 mm) linear position accuracy
- Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
- Exclusive IntelliTRAX abrasive jet linear drive system provides 350 in/min (8.9 m/min) traverse with real-time closed-loop positioning feedback
- 12-inch (305 mm) programmable Z axis travel with lowest ceiling height requirement design in the industry.
Premium software
- IntelliMAX Software Suite incorporating 3D Path Editor and IntelliVISOR system monitoring software.
- IntelliCAM; 3D model Software with plug ins to most major solid model packages to allow the operator to generate tool paths direct from their solid model software of choice.
OMAX benefits
- Does not create heat-affected zones or mechanical stresses
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- No tool changes & minimal fixturing dramatically reduce setup
OptiMAX 60X

OptiMAX 60
- Cutting envelope of 10′ 10″ x 5’ 2” (3,302 mm x 1,575 mm)
- ±0.001″ (±0.025 mm) linear position accuracy
Machine Dimensions
FOOTPRINT (WITH PUMP & CONTROLLER) | 25′ 2″ x 12′ 11″ (7,671 mm x 3,937 mm) |
---|---|
HEIGHT (WITH SCISSOR PLUMBING) | 10′ (3,048 mm) |
OPERATING WEIGHT | 49,575 lb (22,487 kg) |
WEIGHT (TANK EMPTY) | 9,150 lb (4,151 kg) |
X-Y CUTTING TRAVEL* | 14′ x 6′ 8″ (4,267 mm x 2,032 mm) |
Z-AXIS TRAVEL (WITH MOTORIZED Z AXIS)* | 12″ (305″ mm) |
TABLE SIZE | 21′ 7″ x 12′ 11″ (6,578 mm x 3,937 mm) |
Specifications
MATERIAL SUPPORTS SLATS | 4″ x 1/8″ Galvanized Steel |
---|---|
MAXIMUM SUPPORTED MATERIAL LOAD | 400 lbs/sq ft (1,950 kg/sq meter) |
ELECTRICAL REQUIREMENTS | 3-Phase, 380-480 VAC ±10%, 50-60 Hz |
NOISE LEVEL | Below 80 dBA at one meter for submerged cutting |
SPEED | 350 in/min (8,890 mm/min) |
LINEAR POSITIONAL ACCURACY* | ±0.001″ (±0.025 mm) |
REPEATABILITY* | ±0.001″ (±0.025 mm) |
BALLBAR CIRCULARITY* | ±0.0025″ (±0.0635 mm) |
Download Brochure
OptiMAX 80X

OptiMAX 80
- Cutting envelope of 14′ x 6′ 8″ (4,267 mm x 2,032 mm)
- ±0.001″ (±0.025 mm) linear position accuracy
Machine Dimensions
FOOTPRINT (WITH PUMP & CONTROLLER) | 25′ 2″ x 12′ 11″ (7,671 mm x 3,937 mm) |
---|---|
HEIGHT (WITH SCISSOR PLUMBING) | 10′ (3,048 mm) |
OPERATING WEIGHT | 49,575 lb (22,487 kg) |
WEIGHT (TANK EMPTY) | 9,150 lb (4,151 kg) |
X-Y CUTTING TRAVEL* | 14′ x 6′ 8″ (4,267 mm x 2,032 mm) |
Z-AXIS TRAVEL (WITH MOTORIZED Z AXIS)* | 12″ (305″ mm) |
TABLE SIZE | 21′ 7″ x 12′ 11″ (6,578 mm x 3,937 mm) |
Specifications
MATERIAL SUPPORTS SLATS | 4″ x 1/8″ Galvanized Steel |
---|---|
MAXIMUM SUPPORTED MATERIAL LOAD | 400 lbs/sq ft (1,950 kg/sq meter) |
ELECTRICAL REQUIREMENTS | 3-Phase, 380-480 VAC ±10%, 50-60 Hz |
NOISE LEVEL | Below 80 dBA at one meter for submerged cutting |
SPEED | 350 in/min (8,890 mm/min) |
LINEAR POSITIONAL ACCURACY* | ±0.001″ (±0.025 mm) |
REPEATABILITY* | ±0.001″ (±0.025 mm) |
BALLBAR CIRCULARITY* | ±0.0025″ (±0.0635 mm) |
Download Brochure
Discuss Your Application
In Illinois Call Joe Talarczyk
Call: 877-250-1770

Give Me A Call
To discuss your application, schedule test cuts or request a quote.
Request A Quote